Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 40-60
• Adjustable cut in/out: cut out range 20-65 psig